Nose Ring Piercing Removal

With a nose piercing, there are different types of nose jewelry to try out. Changing your nose ring once in a while for a new look is a welcome idea. You may even just want to give your piercing site a good cleaning or attend an event ring free.

Unfortunately, putting in and removing a nose ring isn’t second nature to most people. You may find it difficult, and this can be a scary and frustrating experience. This article will show you how to put on and take off a nose ring like a pro.

💡 Warning: Do not attempt to change your nose jewelry before it is fully healed. This can cause irritation, slow the healing process, or cause the piercing to close.

Keloids On Nose Piercings And Ear Piercings Can Be Common

The easiest type of nose ring to put in is an L-shaped stud. The stud is shaped like an “L, ” so to put it in:

The different types of nose rings require varying methods. Before removing or putting in a nose ring, wash your hands with soap and water. Get rid of the dirt under your nails to avoid transferring dirt to your piercing. Also, clean the piercing site using a q-tip soaked in saline. 

A corkscrew nose ring is a bit more complicated to put in than a typical stud. However, there are other reasons your corkscrew ring won’t go in.

How Long Does It Take For A Nose Piercing To Close?

Your corkscrew nose ring might be stuck because of boogers. So, you may need to clean your nose before attempting to remove it. Using a q-tip soaked in saline can help.

A flat back stud, also known as a labret stud, has a post with a gem and a flat back. It can either be a push pin flatback (also known as a threadless flat back) or a threaded flat back.

To take out your nose ring for the first time, you need to know what kind of nose ring you were pierced with. This will determine the method you will use. Usually, your piercer will inform you, but you can call to ask.

A Comprehensive Guide: What To Know When Changing Your Nose Piercing F

Once your hoop piercing is in, make sure it fits correctly. You may need to adjust it for a more snug fit. We wrote a guide to help you fit your nose ring snugly.

Typically, after getting your piercing, your piercer will walk you through the aftercare process and how to change your jewelry when your piercing is fully healed. You must know the kind of nose ring your piercer put in.

With all the descriptions, you now know how to put on and take off a nose ring. However, if you’re still apprehensive about doing it yourself, you can visit your piercer to help change your jewelry for a small fee.

How To Clean A Nose Piercing According To Professionals In 2022

You should know: We use affiliate links throughout our site. This means we may earn a cent or two when you make a purchase on our site. Thanks for adding to our shine.A nose ring is a nice accessory that can accentuate your gothic style and fashion. However, there will come a time when you would have to remove your nose ring or a nose stud, maybe because it’s necessary or you would want to change the accessory. Accidents can also happen that will need you to remove your nose piercing.

With that being said, you have to learn how to remove nose rings in your way without causing any injury or infection to your nose. Here are 12 different ways on how to draw different types of nose rings during other circumstances. 

What is a nose stud? It’s usually a post attached to a stud with a small bead inside the nostril to hold the stud in place. Taking out your nose stud for the first time might sound a bit frightening for you. But when you need to do it, you have to know the proper step-by-step procedure.

Nc Teen: Nose Ring More Than Fashion, It's Faith

First, you will need to wash your hands. Your hands must be clean and sanitized before touching your nose. Then, feel for the small bead inside your nostril, and then gently push it so that the post will extend outside your nose. While the bead is pressed against the nostril, use your other hand to pull the stud from the outside.

If you cannot remove the stud with your fingers, you can use nail clippers or tweezers. Ensure that you have another stud or nose ring for replacement; otherwise, the hole might close.

As the name suggests, a seamless hoop nose ring does not contain any beads or studs, or clasps to close it. Seamless hoop nose rings have a break in the middle, and this break has to come apart to remove your nose ring. Before removing it, sanitize. Then, you can place a lubricant around the area where your nose ring is. It will help in sliding the hoop nose ring out easily without causing injury.

How To (safely) Remove Jewelry From Piercings, According To Experts

After the lubricant, twist the two ends of the nose ring so that one end comes above the other, not apart. It will create a gap so that your nose ring will be removed. When you try to separate the two ends, the nose ring might break.

If you are having trouble doing it because of shaky fingers, you can try using opening and closing pliers --  a tool to remove nose rings. These pliers are specially made to hold and grip nose rings.

You may also experience your seamless hoop nose ring getting stuck inside your nostril. This happens when your piercing hole has partially closed already because you have not inserted any piercing for a while.

How To Minimize Scarring After Taking A Nose Piercing Out?

You do not need to panic, and you can just visit a professional piercing artist or salon to have your piercing checked.

Also known as captive bead nose rings, a nose ring with a ball means small balls attached to the end of the nose ring. Before removing your nose ring, make sure also to disinfect it with a swab of alcohol. This would prevent infection or harboring of bacteria as you remove it.

To begin removal, first, sanitize your hands. Then, hold your nose ring and turn it so that you can get ahold of the ball attached at the end with your other hand. Next, twist the ball until it detaches and pops off from the nose ring.

Ring Opening Pliers, Cimenn Surgical Steel Body Piercing Kits Ear Nose Lip Navel Tongue Septum Forcep Clamp Pliers Tool, Precision Circlip Pliers Retaining Clip Pliers Solid Spring Removal Tool

When the ball is already out, you can now turn and move your nose ring so that the part with no ball will just slide out of the hole in your nose.

A nose segment ring is a nose ring with another segment with a section that makes it easier to take out. This segment is a curved portion that is removable during the opening and closure of your nose ring. It is usually more comfortable to wear when you have a nose segment ring than other nose ring types since the segment allows the nose ring to rotate 360 degrees.

With the design of nose segment rings, they are less likely to be tangled on clothing or hair, which means less irritation to the person.

Instructions For Changing Out A Nose Ring

Sanitize your hands. With one hand, hold the removable segment and then hold the other part of the ring with your other hand. Gently pull the two pieces away from one another, but avoid twisting, or else you might end up hurting yourself.

The difference between a screw nose stud and an ordinary stud is the back end inside the nostril. For a regular nose stud, a straight bar is what’s inside your nostril. For a screw nose stud, the back end inside the nostril is either an I-shaped bar or a hook. Removing it is pretty much the same as removing an ordinary nose stud.

To begin, sanitize and disinfect your hands. Then, you have to make sure that the I-shape of the back end of your nose stud is pointing outwards. Gently pull the stud out until you can already see most of the bar. Then, adjust the stud so that it is pointing towards the middle of your nose. Continue pulling the nose stud gently until the rest of the screw comes out.

Things I Wish I'd Known Before I Got My Nose Pierced

Corkscrew nose rings are also known as twisted nose rings. As the name suggests, the back end of these nose rings is corkscrew-shaped to secure the nose rings in place even without a ball. Removing this nose ring can be quite challenging because the corkscrew-shaped back end has to be rotated correctly.

After sanitizing, use your finger or a cotton swab to rotate the corkscrew part in a way that it is slightly protruding from your nose. Then, get a good grip of the piercing and then gently pull and rotate it towards the direction of the corkscrew to remove it.

An L-shaped nose ring has the back end oriented at a 90-degree angle inside the nostril. There is a tendency that the nose ring might fall off if it is not securely put inside the hole.

How To Remove A Nose Bone Ring

When you plan to remove your l-shaped nose ring, you first need to insert your finger inside your nostril and press the jewelry against the side of your nose. This will help stick the stud out of your nose so that you will see a part of the bar.

Then, use your index finger